1, the radiator should not be any acid, alkali or other corrosive nature of contact.

    2, the proposed use of soft and hard water softening treatment to be used, to avoid clogging the radiator and the internal scale production.

    3, in the use of antifreeze, in order to avoid corrosion of the radiator, make sure to use the regular factory production line with national standards and long-term rust antifreeze.

    4, in the process of installing the heat sink, do not damage the heat tape (film) and bumps the radiator to ensure that the cooling capacity and sealed.

    5, completely drain and then filling the radiator, the first drainage of the switches turn on the engine block, there is flowing out, and then closed to avoid blisters.

    6, in daily use should always check the water level, add water to cool down. Add water, slowly open the tank cover, operators should try to stay away from the body increases intake to prevent high-pressure steam exhaust outlet of the oil increases to cause burns.

    7, in the winter to prevent ice cores caused by rupture phenomena, such as stopping the long-term parking or indirectly, should the radiator cap and turn on the water switch, all the water released.

    8, spare radiator effective environment should be ventilated and dry.

    9, depending on the actual situation of the user should be between 1 to 3 months to completely clean a radiator core body. Cleaning, with water into the wind along the side of anti-flushing. Regular cleaning can completely prevent the radiator core is blocked by dirt video

    3, in the use of antifreeze, in order to avoid corrosion of the radiator, make sure to use the regular manufacturers meet the national standards, and long-term rust antifreeze.

    4, in the process of installing the heat sink, do not damage the heat tape (film) and bumps the radiator to ensure that the cooling capacity and sealed.

    5, completely drain and then filling the radiator, the first drainage of the switches turn on the engine block, there is flowing out, and then closed to avoid blisters.

    6, in daily use should always check the water level, add water to cool down. Add water, slowly open the tank cover, operators should try to stay away from the body increases intake to prevent high-pressure steam exhaust outlet of the oil increases to cause burns.

    7, in the winter to prevent ice cores caused by rupture phenomena, such as stopping the long-term parking or indirectly, should the radiator cap and turn on the water switch, all the water released.

    8, spare radiator effective environment should be ventilated and dry.

    Nine, depending on the actual situation of the user should between 1 to 3 months to completely clean a radiator core body. Cleaning, with water into the wind along the side of anti-flushing. Regular cleaning can completely prevent dirt blocking the radiator core is affected by cooling performance and service life of the radiator.

    10, the water level gauge should be cleaned once every 3 months or, as the actual situation, the components removed by warm water non-corrosive detergent.
The article above is transfered from glow plug, and spark plug