Recently, the International Electrotechnical Commission (IEC) said that with the IEC62196-1 and IEC62196-2 standard two to complete the final draft of the draft, IEC-date electric vehicle (EV) international standard is nearing completion. Standard definition of the electric vehicle (EV) charging plugs and sockets.

     According to reports, two new standard definition of the final draft text for electric vehicle charging plugs and sockets. IEC62196-1 content for the general requirements, IEC62196-2 defines a name for the type 1, 2 and 3, respectively, the three types of power connection system. These are fully taken into account different national electrical infrastructure and control conditions were completed.

     These standards are based on IEC61851-1 standard, which defines the power to the electric vehicle charging four modes. IEC62196-1 standard applies to all four modes, and IEC62196-2 standard only applies to mains charge mode. Another is developing a standard IEC62196-3 is applicable to DC DC charging. In addition, IEC61851-1 used to define three types of electric vehicle charging cable and plug set.

     EV charging mechanism around the world carried out extensive research and development work on the basis of, IEC standards for various countries make provision for electricity infrastructure, to avoid different parts of the world independent of the development of business solutions to generate incompatible the risk. IEC standard parameters required to meet the regulatory agencies in the production process manufacturers refer to these types, models and cases, you can market their products to meet different requirements of regulatory agencies.